The Lone Ranger – 60/14 Bolt swap – Rear Shock Mounting

The axle shock mounts came as a part of Ruff Stuff’s “Simple Dana 60/70″ swap kit. I made the upper mounts using the same 2” tube I had in the front:
Sara L.: Build and Misc &emdash;

On the frame side, I used a piece of 2″x3″x1/4″ wall tube to go across the frame rails. Here it is tacked on checking the mounting locations:
Sara L.: Build and Misc &emdash;

Burned home with some gussets:
Sara L.: Build and Misc &emdash;

Shocks installed:
Sara L.: Build and Misc &emdash;

Sara L.: Build and Misc &emdash;

Leave a Reply